Inter-M RM-N1000 is Network Remote Mic Station works with IPA-100 Controller. It is possible to broadcast digital network announcements in conjunction with the IPA SYSTEM as a network remote microphone that can be controlled in an integrated way.
The Inter-M RM-N1000 paging microphone is perfect for businesses that require an audio system controlled via the network. When paired with the Inter-M IP Network speakers, users can configure and control paging and announcements from a single or multiple locations.
Users can create specific zones to address many speakers at the same time; this makes it possible to play different background music or announcements, as well as control audio settings for each speaker individually or simultaneously. The user-defined zones are particularly helpful in larger systems as they make it easier for users to manage settings and ensure the right messages or music are delivered to the right location at the right time.
Click to download
BROADCAST PAGING VIA NETWORK
RM-N1000 can connect Inter-M’s Network Connecting System and paging broadcast through it.
GOOSENECK MICROPHONE
You can use the gooseneck microphone to broadcast paging in each area.
0~9 KEY, ALL, TALK, CHIME BUTTON
You can select the broadcasting area simply by using the 0~9 key and the All button. In addition, you can set the
operation mode of the Talk button and the Chime button.
2.43 INCH OLED DISPLAY
You can check and set the status of the device through the display.
OUTPUT LEVEL METER
You can check the output level through the level meter.
MONITOR SPEAKER
You can check the current output in real time through the monitor speakers.
INPUT/OUTPUT ADJUSTMENT VOLUME
You can adjust the MIC input gain and monitor speaker output, Chime, and AUX volume.
DC 24V POWER INPUT
Since there is a DC 24 V power input terminal, you can input the power using the adaptor.
POWER SUPPLY USING PoE (Power over Ethernet)
In locations featuring a PoE, you can supply power using the PoE without going through a dedicated adapter. (PoE
supplies Primary only.)
Specifications
RM-N1000
Input Sensitivity(MIC)
-50dBV ± 3dB
Output Sensitivity (MIC)
+10dBV ± 3dB
Signal-to-noise Ratio(<20 kHz LPF)(MIC)
More than 65dB
THD (<20kHzLPF)(MIC)
Less than 0.1%
Frequency Response
100 Hz ~ 18 kHz
(Input: -50dBV, 1kHz)(MIC)