IPA-R10 It receives the sound source and control signal sent from the IPA-T10 through the network, transmits it to the amplifier, receives and controls the fire contact point, and intuitively controls 16 zones through the LED on the front panel. (Built-in line checker function)
IPA-R10: Receiver
It receives the sound source and control signal sent from the IPA-T10 through the network, transmits it to the amplifier, receives and controls the fire contact point, and intuitively controls 16 zones through the LED on the front panel. (Built-in line checker function)
PC integrated control
Equipment control and monitoring function through NETWORK in conjunction with IPA system
3-wire speaker line control
Channels for general broadcasting and emergency broadcasting are configured for 3-wire broadcasting.
Real-time short detection function
You can set the real-time short check level for each channel, and when an overcurrent occurs, it detects it in real time
and blocks the corresponding channel immediately.Various line status display
The speaker line status is displayed as NORMAL, EM, and LINE FAULT through the front STATE LED.
NORMAL (Green LED on) : Broadcast is output through the HOT speaker terminal.
EM (red LED on) : Broadcast is output through the HOT/EM speaker terminal.
LINE FAULT (Orange LED lights up): Short circuit occurs in the speaker line
LED off : Broadcast is not output.
Sound source function
It can output audio received over the network.
Buzzer action
When a line abnormality is detected, the buzzer operates, so you can easily detect the condition of the
line. You can decide whether to use the buzzer through ON/OFF in the PC integrated control.
Low voltage detection
When the power supply voltage (DC 24V) decreases below a certain voltage (DC 18V +5%), a low-
voltage notification is generated with a buzzer sound.
| Specifications | IPA-R10 |
|---|---|
| Real-time short check capacity (variable) | 0.8A | 1.6A | 2.4A | 3.2A | 4.0A |
| Recommended Amplifier Capacity | 120W or more | 200W or more | 300W or more | 360W or more | 400W or more |
| Amplifier Input Channel | 16CH |
| Speaker Output Channel | 16CH/3 wire |
| Output level | 0dBV(1Vrms), BALANCE |
| Frequency characteristics | 20Hz ~ 20KHz |
| S/N | 75dB |
| Fire Reception Method | P-type contact method |
| Power Used | DC 24V, 750mA |
| Operating Temperature | -10℃ ~ +40℃ |
| Weight (set) | 4.7kg |
| Dimensions(SET) | 482(W) x 88(H) x 280(D)mm |
| Brand | INTER-M |
|---|
